Epoxy Resinpal 2404-H is a clear epoxy gelcoat.
The crack resistent gelcoat is ideal for insertion into a negative mold. Due to the highly thixotropic setting of the Resinpal 2404-H epoxy gelcoat, it can be easily applied to vertical surfaces without it draining off.
The gelcoat Resinpal 2404-H hardens on the air side sticky. So, reinforcing fibers can be incorporated in difficult and complex forms.
Due to the clear color of the epoxy gelcoat Resinpal 2404-H is very suitable for components made of carbon. Resinpal 2404-H forms a UV-stabilized, scratch-resistant protective layer around the component.
Epoxy Gelcoat Resinpal 2304-H should be mixed with the supplied hardener in a ratio of 100: 50 (by weight). The mixture should be stirred until homogeneous. Resinpal 2404-H can be mixed with epoxy color pastes. The optimum processing temperature is 18 degrees. The processing time is about 20 to 25 minutes.