The Epoxy Universal Primer is preferably used for priming if the adhesion of the substrate is too low for painting or for filling.Preferably, this epoxy primer is used as the basis for the use of the epoxy filler Nautic.
Epoxy Universal Primer shows very good adhesion to a wide range of substrates, especially aluminum, galvanized sheet metal, steel, iron, aluminum, GRP based on epoxy and based on polyester, galvanic substrates and hot dip galvanized substrates.
The epoxy primer is fast curing and water resistant. In addition, optimal rust protection.
For work, the substrate should be clean, free of grease and sanded. The mixing ratio of epoxy resin and epoxy hardener is 3: 1. After about 4-5 hours, the primer can be further processed. Ideally the temperature is more than 10 ° C.